Stage One Completed

Only an hour of work on the pool fence today installing the self closing gate.

I clamped the gate to the support post and then squared everything up before fitting the hinges.

P1010126

With everything squared and level I fitted the latch to the long post.  The release button is on top of the latch and must be a minimum of 1500mm above ground level.  Ours is 1800mm.

P1010127

Finished section

P1010128

The remaining fencing will have to wait until the pool is installed.

Reading these last two posts must be as interesting as watching paint dry! Smile

Post a Comment

Previous Post Next Post

Iklan In-Feed (homepage)

" target="_blank">Responsive Advertisement